The Spot-Spitter Pressure Compensating (PC) Assembly replaces the spaghetti tube supplying each Spot-Spitterin your system. Spot-Spitters used with PC Assemblies deliver the same flow rate to your containers even if there are pressure variations in your system. Additionally, they shut off when line pressure drops below 10 psi, which means that all Spitters turn on and turn off at the same time, and flow at the same rate. Water in your lines does not all drain into the pot at the lowest elevation on shutdown. The result: unparalleled uniformity along with the classic Spitter pattern. Use PC Assemblies for high-frequency irrigation, or if you simply need everything to run perfectly.
PC Assemblies require 25-60 PSI supply pressure. Check that your system supplies at least 25 psi. If your supply pressure is greater than 60 PSI we recommend using a 25 or 30 PSI Pressure Regulator.
Use high flow PC Assemblies with Dark Green or Blue Spitters or low flow PC Assemblies for Light Green, Orange or Grey Spitters. Note that PC Assemblies will not work with the Black Spitter. Requires 25-60 PSI supply pressure.
|
|
